TPP 65-105E-D

AC/DC Medical Power Supply • Compact encapsulated 65 Watt PCB module (3.2"x2.2") • I/O isolation 4000 VAC rated for 250 VAC working voltage • Certification according to IEC/EN/ES 60601-1 3rd edition for 2 x MOPP • Risk management process according to ISO 14971 incl. risk management file • Acceptance criteria for electronic assemblies acc. to IPC-A-610 Level 3 • Low leakage current 95%, 0.5 periods, perf. criteria A >95%, 1 period, perf. criteria A >95%, 250 periods, perf. criteria B EN 61000-4-11 30%, 25 periods, perf. criteria A >95%, 0.5 periods, perf. criteria A >95%, 1 period, perf. criteria A >95%, 250 periods, perf. criteria B General Specifications Relative Humidity Temperature Ranges Power Derating Cooling System Altitude During Operation Switching Frequency Insulation System Working Voltage (rated) Isolation Test Voltage - Operating Temperature - Storage Temperature - High Temperature - Low Input Voltage - Input to Output, 60 s - Input to Case or PE, 60 s - Output to Case or PE, 60 s 95% max. (non condensing) –40°C to +85°C –40°C to +85°C See application note: www.tracopower.com/overview/tpp65e-d See application note: www.tracopower.com/overview/tpp65e-d Natural convection (20 LFM) 5'000 m max. 50 - 130 kHz (PWM QR) Reinforced Insulation 250 VAC 4'000 VAC 2'500 VAC 2'500 VAC All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 23, 2021 Page 3 / 5 TPP 65E-D Series, 65 Watt Creepage Clearance Isolation Resistance Isolation Capacitance Leakage Current Reliability Environment - Input to Output - Input to Case or PE - Output to Case or PE - Input to Output - Input to Case or PE - Output to Case or PE - Input to Output, 500 VDC - Input to Output, 100 kHz, 1 V - Touch Current - Calculated MTBF - Vibration - Mechanical Shock - Thermal Shock Housing Material Potting Material Pin Material Pin Foundation Plating Pin Surface Plating Housing Type Mounting Type Connection Type Soldering Profile Weight Environmental Compliance - REACH Declaration - RoHS Declaration 8 mm min. 4 mm min. 4 mm min. 4 mm min. 4 mm min. 4 mm min. 100 MΩ min. 1'250 pF typ. / 1'500 pF max. 100 µA max. 1'494'000 h (MIL-HDBK-217F, ground benign) IEC 60068-2-6 5 g, 3 axis, sine sweep, 3x30 min, 5-500 Hz IEC 60068-2-27 50 g, 3 axis, 11 ms MIL-STD-810F -40 to +85°C, 72 cycles, 30 min each Plastic (UL 94 V-0 rated) Silicone (UL 94 V-0 rated) Tinned Copper Nickel (2 - 3 µm) Tin (3 - 5 µm), matte Plastic Case PCB Mount THD (Through-Hole Device) Wave Soldering 260°C / 6 s 265 g www.tracopower.com/info/reach-declaration.pdf REACH SVHC list compliant REACH Annex XVII compliant www.tracopower.com/info/rohs-declaration.pdf Exemptions: 7c-I (RoHS exemptions refer to the component concentration only, not to the overall concentration in the product (O5A rule). The SCIP number is provided on request.) Supporting Documents Overview Link (for additional Documents) www.tracopower.com/overview/tpp65e-d All specifications valid at nominal voltage, resistive full load and +25°C after warm-up time, unless otherwise stated. www.tracopower.com November 23, 2021 Page 4 / 5 TPP 65E-D Series, 65 Watt Outline Dimensions Pinout 3.8 (0.150) 30.5 (1.201) SIDE VIEW Pin Function 1 AC (N) 2 AC (L) 4 Trim 5 Vout 6 +Vout 81.3 (3.201) 69.17 (2.723) Ø1.0 (0.039) 4 BOTTOM VIEW 19.84 (0.781) 69.8 (2.748) 11.91 (0.469) 28.7 (1.130) 7.62 (0.300) 44.45 (1.750) 34.9 (1.374) 3.99 (0.157) 6 1 2 21.47 (0.845) 55.9 (2.201) 5 All dimensions in mm (inch) Tolerance: X.X ±0.5 (X.XX ±0.02) X.XX ±025 (X.XXX ±0.010) © Copyright 2021 Traco Electronic AG Specifications can be changed without notice. www.tracopower.com Rev. November 23, 2021 Page 5 / 5